
60529 Complete IP Testing Equipment from IPX1 To IPX8 Open Type
Standard of IP Testing Equipment:
IEC60529 degree of protection provided by enclosures (IP Code), clause 14.2.1, 14.2.2, 14.2.3, 14.2.4, 14.2.5, 14.2.6, 14.2.7, 14.2.8, and figure 3, figure 4, figure 5 and figure 6, IPX1, IPX2, IPX3, IPX4, IPX5 IPX6, IPX7 and IPX8, Table 3.
Application of IP Testing Equipment:
It is used to test the degrees of protection against ingress of water indicated by the second characteristic numeral.
Table 3 – Degrees of protection against water indicated by the second characteristic numeral
Second characteristic numeral | Degree of protection | Test conditions, see | |
Brief description | Definition | ||
0 | Non-protected | - | - |
1 | Protected against vertically falling water drops | Vertically falling drops shall have no harmful effects | 1 4.2.1 |
2 | Protected against vertically falling water drops when enclosure tilted up to 1 5° | Vertically falling drops shall have no harmful effects when the enclosure is tilted at any angle up to 1 5° on either side of the vertical | 1 4.2.2 |
3 | Protected against spraying water | Water sprayed at an angle up to 60° on either side of the vertical shall have no harmful effects | 1 4.2.3 |
4 | Protected against splashing water | Water splashed against the enclosure from any direction shall have no harmful effects | 1 4.2.4 |
5 | Protected against water jets | Water projected in jets against the enclosure from any direction shall have no harmful effects | 1 4.2.5 |
6 | Protected against powerful water jets | Water projected in powerful jets against the enclosure from any direction shall have no harmful effects | 1 4.2.6 |
7 | Protected against the effects of temporary immersion in water | Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed in water under standardized conditions of pressure and time | 1 4.2.7 |
8 | Protected against the effects of continuous immersion in water | Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is continuously immersed in water under conditions which shall be agreed between manufacturer and user but which are more severe than for numeral 7 | 1 4.2.8 |
9 | Protected against high pressure and temperature water jets | Water projected at high pressure and high temperature against the enclosure from any direction shall not have harmful effects | 1 4.2.9 |
What Is the IPX Waterproof Rating Table?
The IPX Waterproof rating chart summarizes the waterproof protection ability of the casing to its internal equipment under different waterproof grades from IPX1 to IPX9K. The larger the value, the more severe the requirements for the waterproof level. Specific IPX rating descriptions are described in the table below. You can choose the corresponding test items according to the waterproof requirements you want to achieve.
The IPX Rating Table as below:
IPX Code | Degree of Protection |
IPX0 | None |
IPX1 | Protect the equipment inside the enclosure against vertical water drips |
IPX2 | Protect the equipment against vertical water drips with the enclosure inclined by 15° in four directions, respectively |
IPX3 | Protect the equipment inside the enclosure against spraying water |
IPX4 | Protect the equipment inside the enclosure against splashing water |
IPX4K | Protect the equipment inside the enclosure against splashing water with increased pressure |
IPX5 | Protect the equipment inside the enclosure against water jets |
IPX6 | Protect the equipment inside the enclosure against strong water jets |
IPX6K | Protect the equipment inside the enclosure against strong water jets with increased pressure |
IPX7 | Protect the equipment inside the enclosure against the effects of temporary immersion in water |
IPX8 | Protect the equipment inside the enclosure against the effects of continuous immersion in water under conditions agreed upon by the interested parties |
IPX9/IPX9K | Protect the equipment inside the enclosure against high pressure and high temperature water jets |
Guangzhou HongCe Equipment Co., Ltd.
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicated in providing laboratory testing equipment and production line testing system, we are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.
Our core technologies encompass vacuum, leak testing & automatic control, laboratory test equipment & solution. Our technical leader is an expert in leak detection, his more than 2 decades of experience are a great asset to our firm. Our technical team is comprised of wellexperienced engineers and technicians.
HongCe laboratory testing equipment are designed and manufactured as per the requirements of GB, IEC, EN, UL, VDE, BS, AS, ISO standards and etc. Our main products are: switch, plug, socket and coupler test equipment; mechanical strength impact test equipment; material fire hazard test equipment, enclosure protection test probes; waterproof and dustproof environmental testing equipment; household appliances testing equipment; wire and cable testing equipment; luminaires test equipment; electric tools test equipment; information technology and audio & video test equipment. Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.
HongCe production line testing equipment are mainly customized according to client's workpieces, such as automatic leak testing system, gas recovery system, other tailor-made system based on vacuum & leak testing technology.