
Electronic Test Equipment IEC60695-5-10 Glow Wire Testing Equipment
Application
• The Glow Wire Tester is designed to carry out fire hazard testing on electro technical
products in accordance with the provisions of International
standards.
• The control unit is supplied with all the controls and metering
necessary to accurately set the temperature of the glow wire. The
wire current is continuously variable by means of the panel-mounted
controller and is monitored by the built-in ammeter.
• A digital temperature indicator is fitted which, in conjunction
with the thermocouple supplied, accurately measures the glow wire
temperature. The electrical circuit of the control unit is fully
protected by fuses and a miniature circuit breaker and incorporates
mains on/off switching and push button control of the output
current. Self contained cabinet with large viewing window and dark
colored interior.
Technical parameters
Glow wire diameter | 4mm±0.04mmNi/Cr(80/20) |
Temperature range | 500 ~ 750℃±10℃;750 ~ 960℃±15℃ |
Thermocouple diameter | 0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand temperature-40~ 1100°C |
Searing Time | 30s±0.1s (OMRON H5CN-XAN-Z digital timer, 0-9999s, preset table) |
Light-off Time | 0-999.9 s ± 0.1 s, automatic recording, manual timeout |
Fire out time | 0-999.9 s ± 0.1 s, automatic recording, manual timeout |
Ironing into depth | 7mm ± 0.5 mm |
Sample pressure | 1N ± 0.2 N |
Test speed | 18±3mm/s |
Test background | black background |
Test process automatic control | independent convulsions |
Chamber | ≥0.5m |
Control Using single chip microcomputer | + touch screen control |
Power Supply | AC 220V,50Hz |
Glow Wire Test Chamber.pdf
Company Profile.pdf
Glow-wire |
|
A new glow-wire shall be annealed for a total of at least 10 h by being subjected to a current of at least 120 A before being used for a test run. The total annealing time may be achieved cumulatively. To avoid damage, the thermocouple shall not be installed during annealing. At the end of annealing, the depth of the thermocouple pocket hole shall be verified. | |
Timer | 0-30s ±1s |
Force to the test specimen | 0,95 N ± 0,10 N |
glow-wire into and through the test specimen | 7 mm ± 0,5 mm. |
Speed | 10 mm/s to 25 mm/s |
fine-wire thermocouple | nominal diameter of 1,0 mm. The thermocouple wires shall be
suitable for continuous operation at temperatures up to 960 °C
(e.g. chromel/alumel (Type K) – see IEC 60584-1). The welded point
shall be located inside the sheath as close to the tip as |
Temperature range | 500-1000C° |
Chamber | having a volume of at least 0,5 m3 , dark background, illumination £ 20 lx. |
Initial calibration report: | Required. And shall include the Temperature vs current chart in the
report also |
wooden board (x2) | flat and smooth and having a minimum thickness of 10 mm |
Standards
IEC60695 - 2 - 10 / 11 / 12 / 13,IEC60884-1,IEC60335-1,VDE0620
What is glow wire capable?
Glow wire compatibility is a test that ensures safety and avoids mishaps caused by human mishandling, over-current, or short circuit failures especially within appliance wiring systems. ... Glow wire test is made mandatory under the IEC 60335-1 safety standards.
SKYLINE INSTRUMENTS CO.,LTD
SKYLINE (DONGGUAN SKYLINE INDUSTRIAL CO.,LTD) provides full line of Toys Testing Equipment, Fire Testing Equipment ,Flammability Testing Equipment,Tensile Test Machine, Furniture Testing Machines ,Textile Testing Equipment and other lab test equipment .We also offers value added support services like lab layout, calibration testing procedures / standards, recording techniques and operations of equipment, etc. We have agents to support you in over 10 countries around the world. With a network of representatives providing sales and technical support world-wide.
SKYLINE has achieved good repute in the fields of Fire Testing
Equipment, Footwear Testing Equipment, Toy Testing Equipment,
Furniture Testing and other lab test equipment.
SKYLINE focus on the lab testing equipment for decads and we manufacturers the testing instrument as per the international standards like EN71, ASTM, IS 8124 and SRS.
Our major customers are BV, ITS, TUV, SGS, Hasbro and SASO, For these customer 100% testing instruments are supplied by SKYLINE and we are the continuous supplier for these lab. Since SKYLINE is a manufacturer design/develop with advanced technology and having well experienced Technicians which will provide high quality service after sale.
Our main products
Lab Testing Equipment
Flammability Testing Equipment
Fire Testing Equipment
Wire and Cable Fire Tester
Building Material Fire Tester
Toys Testing Equipment
Environmental Test Chamber
Textile Testing Equipment
Furniture Test Machine
Mattress Testing Machine
Temperature And Humidity Test
Our Service
Testing Equipment Design and manufacture
Test Lab Planning and Establish
Toys Test Equipment Upgrade
Toys Test Equipment operation Training
Toys Finish Goods and Mattress Inspection
Acting for Customer Testing and Certifying
Acting for Foreign Trading Company Quality Inspection
Please have a look at our website and don’ t hesitate to contact us
if any items catch your interest. We will do our best to meet your
requirement.
Thank you for visiting. We look forward to your inquiry to carry
forward win-win cooperation with you soon.