CE Protection Relay Testing Support Secondary Checking Phase Of 2 Merger Units

Support secondary checking phase of 2 merger units of phase, that can also be a merger unit of different channel data between the amplitude, phase, frequency comparison, complete double AD proofreading and so on.

At the same time to support a voltage analog and a set of digital measurements, you can select the voltage analog for the reference phase, to achieve the different locations of the unit data of the secondary checking phase.

When checking phase test, select a channel data, such as a voltage as the base phase, to be measured to be checked phase voltage group amplitude, phase, frequency, while the table shows the form of angle difference and phase difference, and display waveform comparison chart And the vector diagram, through the comparison of information, can check the same side of the voltage phase sequence, the RMS value is correct or not, different side voltage phase relationship, the effective value is correct or not.

KF932 has the characteristics of multi-optical receiver SV sampling data, support SV control block can be network mode or point-to-point mode access, and according to the characteristics of network mode and point to point mode, the corresponding data processing time serial number or time scale Its handling, to ensure the reliability of the data.

In the main interface click on the "Checking phase" to enter the checking phase module SV sampling detection page. For "Checking phase module SV detection page", please refer to "5.2 SV Sampling Analysis" of user manual.

Click or click "ENTER" button after press up,down keyto select the SV control block that will perform the checking phase. When the selected column icon is, it means that the selection has been selected. Can choose two groups.

It is necessary to select "net acquisition (serial number)" or "straight drawing (time scale)" according to whether the SV data is networked or point-to-point access, and the application program automatically determines the optical port according to the SV data access Net mining or straight mining. At the same time also need to choose the sampling rate of SV data corresponding to the majority of the engineering application of 4000Hz.It is recommended to choose 4000Hz, now support 4000Hz (80 points/cycle), 12.8kHz (256 points/cycle), 4800Hz (80 points/cycle) and 15.36kHz (256 points/cycle)".

Click "F2 to continue" to enter the checking phase sample value comparison page. First need to select the channel of checking phase.

Phase A (L1) "for reference, other phases are" A (L1) for the calculation of phase angle of 0 degrees, tap the screen or press the direction keys to move the cursor, press "ENTER" button, then select the background color for the yellow channel, from the SV control block in the channel list by the up and down keys to move the cursor and press the "ENTER" key to select and confirm.

Figure: Two groups of control blocks between checking phases

Click "F2 simulation table" to display the A / B / C three-phase angle difference (angle difference) and amplitude difference (ratio difference) in dial form;

Click "F3 waveform" to display the waveform comparison of two groups of ABC three-phase channels. In the waveform comparison interface, click "F3". When "F3: sampling period" is displayed, press the left and right arrows Horizontal pull and shrink the waveform; when the display "F3: amplitude scaling", press the direction of the left and right direction to vertically reduce and enlarge the waveform. At the same time touch the left and right sliding "sampling cycle" and "amplitude scaling" gear can also zoom in and out.

Click "F4 Vector" to display 2 groups of ABC three-phase channel vector.

Who am I ?

Since its establishment in 1999, Kingsine Electric Automation Co., Ltd. has focused on researching and developing, producing, and selling Protection Relay Test Sets, CT Analyzers, Reference Power Sources and Calibrators, Voltage and Current Amplifiers, Electricity Monitoring Systems, and Instrumentation. To date, Kingsine's products have been recognized by customers in more than 80 countries worldwide. We regularly participate in large-scale power and energy exhibitions worldwide, including in the United States, Italy, France, Poland, Australia, Dubai, Turkey, Brazil, Philippines, Malaysia, Indonesia, South Africa, Egypt, and other countries, and have received widespread acclaim.Our protection relay testing equipment is compatible with world-renowned relay protection devices such as ABB, SIEMENS, ALSTOM, MITSUBISHI, Schneider, AREVA, SEL, GE, and others. Kingsine Electric has also established a distribution network with partners in the Americas, Europe, Asia, the Middle East, and other countries to provide comprehensive services.

Kingsine is a core supplier to China's State Grid

The facts demonstrate that China's annual power generation has remained the world's number one, with a projected power generation of 840 billion kilowatt hours in 2022, compared to the United States' projected 430 billion kilowatt hours in the same year. China has built the world's most advanced power transmission system for DC current at 1100KV ultra-high voltage levels and more than 11,000 digitized substations based on the IEC61850 standard. China's power grid has the largest, most advanced, safest and most stable power system in the world. We are honored to be the core supplier for State Grid Corporation of China.

Where did I come from?

Kingsine Electric is located in Shenzhen, the "Innovation Capital of China". We have also established subsidiaries in Canada and Hong Kong. Shenzhen is a benchmark city for the development of China's high-tech industry and is home to leading Chinese companies in various industries. Many of China's top companies, including Huawei, the world's largest communication company; DJI, the world's largest commercial drone company; BYD, the world's largest electric vehicle company (which sold 1.86 million electric vehicles globally in 2022, surpassing Tesla's sales of 1.37 million); and Tencent, one of China's leading internet companies, are based in Shenzhen. Excellent enterprises can influence each other, and as the world's factory, Shenzhen has a highly advanced and comprehensive industrial chain, which provides a reliable guarantee for Kingsine Electric to develop, produce, and manufacture high-tech, high-quality, and reliable products.

Where am I going?

Philosophy

Adhering to the belief of novelty in technology and detail in service, and gradually establishing a global service and sales network with worldwide partners and distributors, Kingsine shall spare no effort to serve customers worldwide with innovative technology, reliable products, and quality online service, making electric testing easier across the world.

Business Principles

Kingsine's business principle is to create value for customers, which is reflected in three aspects.

Firstly, Kingsine uses advanced technology to create powerful product features that offer customers a great operating experience.

Secondly, Kingsine provides high-quality products and services at reasonable prices, ensuring that customers receive high value for their investment.

Thirdly, Kingsine emphasizes reliability and after-sales service, providing quality assurance through lean production and ensuring that products have over 15 years of service life and three years of warranty. Kingsine's after-sales maintenance principle is based on cost accounting, ensuring that after-sales service remains efficient and affordable.Based on our modular product design philosophy, and with the help of efficient video diagnostics, our target for after-sales maintenance service is to complete repairs within 20 days.