IEC60587-1984 High Voltage Tracking Tester Plc Touch Screen Control Integrated

Send your message to this supplier

*From:

Your email address is incorrect!

To:Guangzhou HongCe Equipment Co., Ltd.

*Subject:

Your subject must be between 10-255 characters!

*Message:

Your message must be between 20-3,000 characters!

Yes!I would like your verified suppliers matching service!

IEC60587-1984 High Voltage Tracking Tester Plc Touch Screen Control Integrated Design

Ask Latest Price

Brand Name:HongCe

Model Number:HVTR-1

Certification:Third party calibration certificate(cost additional)

Payment Terms:L/C, T/T

Supply Ability:10 sets per month

Delivery Time:45 days

Price:Negotiatable

Company Data

Guangzhou HongCe Equipment Co., Ltd.

Verified Supplier

Contact Person Tessa Huang

Business Type: Manufacturer

Officials: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Quality: Quality Certifitation Available

Visit Website

Product Details Company Profile

Product Details

IEC60587-1984 High Voltage Tracking Tester Plc Touch Screen Control Integrated Design

Standard

IEC60587-1984 and D2303.

Application

Under the influence of moisture and impurities in electrical products, between the different polarity live parts or between the live parts and the grounding metal may cause leakage on the insulation. The generated arc may cause electrical short-circuit or electrical discharge due to discharge. Loss or even fire causes a fire. Leakage tracking test is a destructive test performed on insulating material to simulate the above conditions, and it is used to measure and evaluate the relative creepage resistance of insulator under the action of electric field and impurity water at the specified voltage.

Test sample

Solid electrical insulation materials and products for electronic products and household appliances, such as: relay sockets, changeover switch covers, contactors, etc.

Feature

The tester consists of an experimental part and a control part with an integrated design to facilitate on-site installation and commissioning. Test case shell and structural parts made of SUS304 stainless steel or brass; electrode head SUS304 stainless steel, high temperature corrosion resistance; drop count accurate, stable and reliable control system.

Parameters

Control method	PLC touch screen control
Electrode material	Using the upper and lower electrodes, an alternating voltage of 2.5 kV to 10 kV was applied. When the short circuit leakage current is equal to or greater than 60mA in the test circuit, the time is maintained for 2 seconds. Relay action, cut off the current, indicating that the sample failed
Dropping device	The time constant of the drip device is adjustable so that the drip volume and the drip time interval are precisely controlled
Test voltage current	500 ~ 10kV (adjustable) (digital display); 5 ~ 60mA (binning can be set), short-circuit current up to 100mA; (digital display);
Current control impedance	60, 50, 30, 15KΩ or set according to actual requirements, achieve the requirements of secondary test current 10, 22, 33 and 40mA by switching
Secondary current limiting resistor	15KΩ or set according to actual circuit requirements
Test electrode	2 pairs, respectively, are smooth burrless stainless steel electrodes 0.15mm thick, 12.7×25.4, angle of 160°; And tungsten rod electrode Φ2.4 × 45mm, with the axis and the angle of 30 ° head;
The force of the electrode on the sample	50g±5g.
Number of droplets	1-9999 (digital display, can be preset)
Test wind speed	0.2m/s (new standard)
Pressure drop	1.0A 0.1A (error); 100mA (correct) ±8%
Tracking judgment	Criterion A: When the current through the sample in the high pressure loop exceeds 60 mA, it reaches the end point. The overcurrent device shuts off the power at this time. Criterion B: When the mark reaches the mark on the surface of the sample at 25 mm from the lower electrode, the end point is reached.
Dimensions	Width 600mm x depth 500mm x height 1000mm, exhaust hole diameter ø 100mm
Configuration	It is recommended to choose the electronic weighing device
Accessories	Depth gauge: The accuracy of the depth gauge is ±0.01mm, and the tip of the probe is a hemisphere with a radius of 0.25mm.

Company Profile

Guangzhou HongCe Equipment Co., Ltd.

Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicated in providing laboratory testing equipment and production line testing system, we are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.

Our core technologies encompass vacuum, leak testing & automatic control, laboratory test equipment & solution. Our technical leader is an expert in leak detection, his more than 2 decades of experience are a great asset to our firm. Our technical team is comprised of wellexperienced engineers and technicians.

HongCe laboratory testing equipment are designed and manufactured as per the requirements of GB, IEC, EN, UL, VDE, BS, AS, ISO standards and etc. Our main products are: switch, plug, socket and coupler test equipment; mechanical strength impact test equipment; material fire hazard test equipment, enclosure protection test probes; waterproof and dustproof environmental testing equipment; household appliances testing equipment; wire and cable testing equipment; luminaires test equipment; electric tools test equipment; information technology and audio & video test equipment. Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.

HongCe production line testing equipment are mainly customized according to client's workpieces, such as automatic leak testing system, gas recovery system, other tailor-made system based on vacuum & leak testing technology.

Product Tags: