Portable Electrical Socket Tester Resistance Heating Appliance Couplers For Hot Conditions

IEC60320-1 Clause 18.2 Figure13 Coupler Heating Device In Hot Conditions

Standard:Confirm to the IEC60320-1, clause 18.2 figure13 standard requirement.

Application:It is used for testing the heat resistance of coupler in hot conditions and very hot conditions, this device adopts temperature control, precise display and durable.

Test sample:Coupler in hot conditions and very hot conditions.

Feature:standard Only suitable for testing the connectors in hot conditions and very hot conditions specified in IEC60320-1 standard requirements.

Parameters:

1. Power supply:120V/50Hz.

2. The appliance inlet:

-120℃±2℃ for connectors for hot conditions;

-155℃±2℃ for connectors for very hot conditions;

For 10 A connectors, the appliance inlet is flush-mounted and has a shroud of insulating material.

For 16 A connectors, the appliance inlet is surface-mounted and has a shroud of metal material.

3. Test temperature:0-160° can be preset；

4. Test time:0-99 hours 59 minutes can be preset；

5. Coupler center distance: Uniform arrangement by circle Φ175.

Resistance to heating of appliance couplers for hot conditions or very hot conditions

Appliance couplers for hot conditions and those for very hot conditions shall withstand the heating to which they may be subjected by an appliance or other equipment.

Connectors for hot conditions and those for very hot conditions shall be so constructed that the insulation of the cores of the cord is not subjected to excessive heating.

Compliance is checked, for connectors, by the test of 18.2, and, for appliance inlets, by the test of 18.3.

Rewirable connectors are fitted with a three-core rubber insulated cord, having a cross-sectional area of 1.5mm²; non-rewirable connectors are tested with the cord as delivered.

The connector is inserted into the appliance inlet of an appropriate test apparatus, an example of which is given in figure 13, where it remains for 96 h (four days). Throughout this period, the temperature at the base of the pins is maintained at:

120℃±2℃ for connectors for hot conditions;

155℃±2℃ for connectors for very hot conditions.

For 10 A connectors, the appliance inlet is flush-mounted and has a shroud of insulating material.

For 16 A connectors, the appliance inlet is surface-mounted and has a shroud of metal.

The appliance inlets are of a type corresponding to the connector to be tested and have brass pins of the dimensions specified in the relevant standard sheet.

During the test, the temperature rise at the point of separation of the cores of the cord shall not exceed 50 K.

Our advantage service:

We have our own developing and designing team, which ensure our own technological and innovative products for customers.
For any customers who have new idea about some products, just let us know, we can according to your idea provide a unique design of the products.

Technical support:

All our workers are experienced and skilled.

After sale service:
Our working team and sales teams can guarantee a fast and high efficiency after-sale service for our product sold to everywhere of the global.

About Us:

Guangzhou Hongce Equipment Co., Ltd is a leading company in inspection equipment industry, established in 2003 and located in Guangdong, China. Our company introduced advanced equipment, combined with the most advanced technology production processes, strict quality control system to control the entire process of production. The company combined with a number of high-tech management personnel and advanced equipment, and together with the modern management, computer design and control, our products has reached the international advanced level. The company set R&D design, production, sales as one, specializing in producing electric wire inspection equipment of plug and socket, mechanical robustness testing equipment of electronics, inspection equipment of electronics’ on-fire danger, testing indicator of anti-electric shock and solid objects' entry, general inspection equipment, and other non-standard testing equipment. Our products enhance good selling at home and abroad, and have established supply relationships with a number of well-known companies.

Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicated in providing laboratory testing equipment and production line testing system, we are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.

Our core technologies encompass vacuum, leak testing & automatic control, laboratory test equipment & solution. Our technical leader is an expert in leak detection, his more than 2 decades of experience are a great asset to our firm. Our technical team is comprised of wellexperienced engineers and technicians.

HongCe laboratory testing equipment are designed and manufactured as per the requirements of GB, IEC, EN, UL, VDE, BS, AS, ISO standards and etc. Our main products are: switch, plug, socket and coupler test equipment; mechanical strength impact test equipment; material fire hazard test equipment, enclosure protection test probes; waterproof and dustproof environmental testing equipment; household appliances testing equipment; wire and cable testing equipment; luminaires test equipment; electric tools test equipment; information technology and audio & video test equipment. Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.

HongCe production line testing equipment are mainly customized according to client's workpieces, such as automatic leak testing system, gas recovery system, other tailor-made system based on vacuum & leak testing technology.